Sump lid flush with floor

[Brinda]

Just another question. So what you are essentially saying is that the frame of the FRP cover acts like ledge ?
Meaning the frame will be higher than the lid.
Do you know someone who also do a good job of fitting this ?
Could you also tell me the name of the stores in Kormangala/ Marthahalli ?

FRP sump lid comes wlong with a FRP frame of same colour. For fitting the frame it will be set on your granite surface with cement or may be some adhesive like metal paste or areldite if it is polished granite and cement won't hold.

No need to go to KR Market for single item because your transport cost will be more than difference in price, in most local hardware shops atlesst in Koramangala and also near Marthahalli from where i buy stuff it is same 1850 Rs may be you can check it out at nearby local shop.

Will try to take picture and post whenever I go to HW /plumbing store next.

I have not fitted sump and chamber lids yet will do omce all the labor moves out of site.

[Visualizer]

1. Patel Hardware in Koramangala this is near to Wipro park on road parallel to 80feet road that is road going inside ST Bed layout.

2. Bhairavi Hardware on ITPL Main road after you take left turn at Kundanhalli Signal

You can find these lids at any nearby shop selling watertanks , pipes etc

Yes the frame acts as ledge and is half rounded outside edge will be same level as floor and inside edge about.1.5 to 2 inch inch thicker towards inside and lid and inner edge are at same level