Hi Suhasbl,
Your post is very helpful. I'm looking to mark the boundary to prevent encroachment by neighbors when they start constructing and also to mark the boundary. How deep did you dig for the pillars?
Did you get this work done through a contractor/mestri? It would be great if you can share the details.
Thanks
COntractor reference to construct boundary wall for a plot
Re: COntractor reference to construct boundary wall for a pl
Can anyone share details of contractors for doing barbed wire fence?
Thanks
Thanks
Re: COntractor reference to construct boundary wall for a pl
Hi bdasites,
Pillars were put 2 ft depth. I got the number from online classifieds and he is a contractor. send PM to me I will share the contact details
Thanks
Pillars were put 2 ft depth. I got the number from online classifieds and he is a contractor. send PM to me I will share the contact details
Thanks
Re: COntractor reference to construct boundary wall for a pl
Why dont you go for precast concrete compound ? It works much cheaper and very suitable for temporary purpose
Re: COntractor reference to construct boundary wall for a pl
Hi suhasbl,
I am planning to build a barbed wire fence next month around my 53x53 plot near devahahalli. I would appreciate if you can fwd me the contractor details that you used
Thanks
I am planning to build a barbed wire fence next month around my 53x53 plot near devahahalli. I would appreciate if you can fwd me the contractor details that you used
Thanks
Re: COntractor reference to construct boundary wall for a pl
Dear Suhasbl
Could you kindly give number of the contractor/workman/mestri who did this boundary wall for you. I am planning to get it done for a plot I have in a private layout near AOL ashrama. Thanks much in advance.
Rgds
Nagaraja
Could you kindly give number of the contractor/workman/mestri who did this boundary wall for you. I am planning to get it done for a plot I have in a private layout near AOL ashrama. Thanks much in advance.
Rgds
Nagaraja
-
- Posts: 9
- Joined: July 16th, 2011, 12:35 am
Re: COntractor reference to construct boundary wall for a plot
Hi,
Please, someone, give me an estimate and contact information to construct boundary fence with cement poll (6 feet tall and barbed wire fence) for two side by side 30*50 sites? (total 3000 sqft). My sites are in south Bangalore Banashankari 6th stage 10th block. Thanks. my email contact is ariesinapril@gmail.com
Please, someone, give me an estimate and contact information to construct boundary fence with cement poll (6 feet tall and barbed wire fence) for two side by side 30*50 sites? (total 3000 sqft). My sites are in south Bangalore Banashankari 6th stage 10th block. Thanks. my email contact is ariesinapril@gmail.com
- ardesarchitects
- Posts: 1080
- Joined: June 20th, 2009, 2:12 pm
Re: COntractor reference to construct boundary wall for a plot
HI Ariesinapril
Fencing cost will be 175 - 200/- per rft for barbed wire fencing with four row wires and stone pillar at every 10', rate variation is based on soil conditions ( hard, soft, depth etc ) . They don't use cement any where. They will dig the pit about 2-3' deep and tight pack the soil around stone pillar.
30+50+30+50 = 160 rft * 175/- per rft = 28,000/-
Regards
Ar.Praveen.N
ardes architects and interior designers
www.ardesarchitects.com
ardesarchitects@gmail.com
Fencing cost will be 175 - 200/- per rft for barbed wire fencing with four row wires and stone pillar at every 10', rate variation is based on soil conditions ( hard, soft, depth etc ) . They don't use cement any where. They will dig the pit about 2-3' deep and tight pack the soil around stone pillar.
30+50+30+50 = 160 rft * 175/- per rft = 28,000/-
Regards
Ar.Praveen.N
ardes architects and interior designers
www.ardesarchitects.com
ardesarchitects@gmail.com