Engineered Acasia for Window/Door

naveenkr
Posts: 34
Joined: July 16th, 2013, 4:29 pm

Re: Engineered Acasia for Window/Door

Post by naveenkr »

Sree, will do in a or two..
kraghum
Posts: 152
Joined: October 8th, 2012, 4:28 pm

Re: Engineered Acasia for Window/Door

Post by kraghum »

Guys because of some delay my order was not ready, but i got a sample piece from GITA timbers, thought it's not making justice. but may clear some doubt on how the wood looks, unfortunately this section doesn't show the finger joints, let me know you are able to access

http://www.flickr.com/photos/66681156@N ... 181539375/

also i was browsing through old insideoutside magzine and came across this company, which makes SOLID WOOD PANEL using same technology, not sure about rates

http://www.indiawoodcompany.com/products.htm
Solid Wood Panel Boards from Indiawood are made by most advanced German technology of finger jointing and edge gluing of colour and grain matched timber scantlings. It is available in natural blonde colour in different thickness of 12mm, 15 mm, 18 mm, 24 mm, 30 mm, 35 mm, and 48 mm and in standard size of 1220 mm x 2440 mm (4' x 8') and special sizes according to individual requirement
sreekbda
Posts: 226
Joined: May 22nd, 2009, 8:07 pm

Re: Engineered Acasia for Window/Door

Post by sreekbda »

Naveen, Any updates / pictures?
naveenkr
Posts: 34
Joined: July 16th, 2013, 4:29 pm

Re: Engineered Acasia for Window/Door

Post by naveenkr »

Sure Sree, shall try this week, was bit tied up with Flaucet/closets... and planning to visit china for Micro Crystal Tiles...
Smithaau
Posts: 27
Joined: December 14th, 2012, 4:00 pm

Re: Engineered Acasia for Window/Door

Post by Smithaau »

We ordered 10 doors of engineered acasia from Gita timbers. We received them and have also started polishing them (walnut wood look). We are happy with the product. It gives a very rich and elegant look!!!
sachinbr
Posts: 25
Joined: October 13th, 2013, 5:30 pm

Re: Engineered Acasia for Window/Door

Post by sachinbr »

how much did it cost u?
cmp
Posts: 5
Joined: August 25th, 2012, 1:33 am

Re: Engineered Acasia for Window/Door

Post by cmp »

If possible can you post pictures? Thanks,
cmp
Posts: 5
Joined: August 25th, 2012, 1:33 am

Re: Engineered Acasia for Window/Door

Post by cmp »

Also, a quick question to all those who have gone with Engineered Acasia - do you know how long this product has been in use and what the long term issues might be such as warping and maintenance? My architect is hesitant to go with this due to issues she has seen with other engineered wood for doors and windows before.

Thanks,
kraghum
Posts: 152
Joined: October 8th, 2012, 4:28 pm

Re: Engineered Acasia for Window/Door

Post by kraghum »

concept is 4-5 year old in Bangalore, pretty old in other parts of world. My architect has this wood for staircase to her office and it's outside. it been exposed to all kinds of natural elements
-rain
-Sun heat
- daily at least 30-40 ppl walking
-been there for 3 years, and no polishing or painting is done

and still it looks fine,
Smithaau
Posts: 27
Joined: December 14th, 2012, 4:00 pm

Re: Engineered Acasia for Window/Door

Post by Smithaau »

Hi,

We were charged Rs 500/- per sqft for the doors.
Post Reply

Return to “Civil Construction”