safety grill fabrication at home premises
safety grill fabrication at home premises
We want to get safety grill fitted for our house in our setback area . The people who do the fabrication want to do the welding work onsite using power from my home. I asked them for the KVA of the machine, but they are not able to tell me. Mine is a 5KW connection for my home. Is it okay to allow them to use the welding machine from my home power ? I'm concerned about the load and any other issues.
Re: safety grill fabrication at home premises
We used connection from home itself (most what have seen) Ours was 3Kva. Any way you would MCB which would trip in case of load.
Re: safety grill fabrication at home premises
can you please share how much the grill cost? . Is it depends on the guage they uses ? .What additional attributes you have considered in deciding the final cost.
Re: safety grill fabrication at home premises
akula
The Welders are not Technical guys to give you the accurate electrical specification of their welding system.
Your household connection of 5KVA is very good capacity. For your confirmation, you can check visit their workshop and
have a look at their system, where the power capacity will be mentioned in a label plate on a side/backside.
Usually all the fabricators specifically uses a smaller machine for the onsite works mainly for logistics purpose and installation
work mainly need joining and small miscellaneous works. These systems doesn't need more than 2KVA.
The Welders are not Technical guys to give you the accurate electrical specification of their welding system.
Your household connection of 5KVA is very good capacity. For your confirmation, you can check visit their workshop and
have a look at their system, where the power capacity will be mentioned in a label plate on a side/backside.
Usually all the fabricators specifically uses a smaller machine for the onsite works mainly for logistics purpose and installation
work mainly need joining and small miscellaneous works. These systems doesn't need more than 2KVA.
Re: safety grill fabrication at home premises
@msn1279,@tamya - thanks for the replies.
@sam_m400 : the cost quoted is around Rs160 per sqft including final painting. 10mm square rods will be used at 4 inches spacing. i've not yet negotiated , i'm hoping to bring it down to 150/sqft.
@sam_m400 : the cost quoted is around Rs160 per sqft including final painting. 10mm square rods will be used at 4 inches spacing. i've not yet negotiated , i'm hoping to bring it down to 150/sqft.
-
bbllaazzee
- Posts: 46
- Joined: January 5th, 2012, 4:29 pm
Re: safety grill fabrication at home premises
@akula, is it possible to PM me the Grill contact?
Re: safety grill fabrication at home premises
150 is also little high. I got it done at a lesser price and they made everything at their factory, and came and installed it. some areas like the doors and any complex areas, they made the grills at the premises.
-
bbllaazzee
- Posts: 46
- Joined: January 5th, 2012, 4:29 pm
Re: safety grill fabrication at home premises
Is it possible to PM me the grill contact?tech4pk wrote:150 is also little high. I got it done at a lesser price and they made everything at their factory, and came and installed it. some areas like the doors and any complex areas, they made the grills at the premises.