myBDAsites.com

I lowered pump till around 570 feet in Oct. Totally cost was around 61K. Details below
Pump - 2/33 Point single phase - 19K
Pipe - Rishi - 100/mtr
Wire - Finolex 4sq mm - 92/mtr
Panel - Shanthi - 2750
Erection charges- 1500
Fittings - 2100
Transport - 500
Vat 5%

Bought from Ramsons on JC Road.
Their service was fine. Came around the promised time and seemed to do a good job. But again, this is the first time I am getting this done, so my expectations may be low. Finally, water came with good force, and that is what matters I guess . So far so good.

Can I know the difference between Aqua & Taro Can u explain me

Jaya Christiyan

blackstallion76 wrote:Got few quotations for 650ft depth, 1.5 inch yield. (dealers from SP road)

Texmo Submersible pump Aqua 3HP - 30 Stages - 23000
Control Panel - Shanthi - 2000
40MM HDPE Pipe (Raksha/Rishi) - 12.5 kg - 200mtrs*78 = 15600
Finolex Cable 220mtrs*84 = 18000
Other accessories - 1500

Got another quote:

Texmo Pump taro 3 HP 30 stage - 25000
Control Panel - Shanthi 2500
40MM HDPE Rishi (highgrade) - 110/mtr
Finolex - 93 / mtr
GI Access - 1600
transport - 600
Installation Charges - 1600

Folks are saying Texmo Aqua does not have warranty and Taro has 2 yrs warranty.

blackstallion76 wrote:Got few quotations for 650ft depth, 1.5 inch yield. (dealers from SP road)

Texmo Submersible pump Aqua 3HP - 30 Stages - 23000
Control Panel - Shanthi - 2000
40MM HDPE Pipe (Raksha/Rishi) - 12.5 kg - 200mtrs*78 = 15600
Finolex Cable 220mtrs*84 = 18000
Other accessories - 1500

Really appreciate if you can give the contact information of the pump dealer.

Thanks

Blackstallion,

Finolex cable "Rs 84" per mt should be fake only. 3 months back i have purchased for my borewell the original finolex cable will cost Rs 91 per mts.

i have purchased from a trusted friend who have given me for Rs 91 which is original.

Please be careful with Finolex cables lots of duplicate is available.

In Rishi there are two types P63 and P80 of 12.5kg i think P80 was Rs 110 per mts and P63 was is Rs 92 i dont know how you are getting this for Rs 78.

Please check for quality. HDPE pipe i have purchased in bangalore (with unknown source) i dont know did i pay more if your is original product price.

Did borewell pump shopping at Jinnani. Very good customer service and the owner is very
courteous and gave me the quotes via email. Highly recommend.

SL NO. DISCRIPTIONS QTY RATE TOTAL
1 TEXMO TARO 2 HP 30 STAGES SUBMERSIBLE PUMP SET 1 18800 18800
2 RISHI ISI 40 MM 10 KG HDPE PIPE[ HEAVY DUTY] 167 79 13193
3 END FITTING SS/GI 1 600 600
4 GELCO 2 HP DOL STARTER WITH DRY RUN ISO CO 1 1900 1900
5 FINOLEX 4 SQMM 3 CORE FLAT CABLE 200 86 17200
6 CLAMP SET, NRV, BEND ETC., 1 1200 1200



TOTAL 52893
VAT 5.5% 2909
7 INSTALATION CHARGES 1200
8 TRANSPORTATION 600

57602

can you please share the genuie dealers from whom you boughts? Since there is duplicate finolex cables like to couple of dealers whom i can get quotation............ Please do share....

What's the pump required for 840' ? I heard it must be submersible (Ramsons, JC Road said that). Also Ramsons was saying you've to go for 4 or 5 HP.

Another quote I got was this:

1. 3 phase 3HP 40 stage motor - 23,800 [ need to check warranty]
2. Starter C&S brand 4,200
3. Rishi pipe - 12.5 Kg is 115/mtr; 10 kg is 90/mtr - need 228m ?
4. Finolex cable 4 sqmm 90/mtr - need 245 m ?
5. Transportation - 800
6. Installation (?) - 1800
7. End pipe fittings 780


Total comes to 81,000

All above includes taxes. This is a dealer guy.
Can someone confirm if the above is good as well ? (I am leaning toward this guy since he'll be closer home, for serviceability and stuff)
but not sure about

1. Do I need extra cable - to run it from borewell point till switch panel, if that's located within watchman shed which is abt 40' from borewell point
2. If water source is 750' but borewell depth is 850', do we need cable & pipe till 850' ?
3. Any idea abt C&S brand panel ?

Btw, dumb q. Why does one need a cable ? Also, is it calculated as meter -> borewell depth conversion ? That is, 90/mtr --> for 840', correspondin price ?

saisuraksha wrote:Blackstallion,

Finolex cable "Rs 84" per mt should be fake only. 3 months back i have purchased for my borewell the original finolex cable will cost Rs 91 per mts.

i have purchased from a trusted friend who have given me for Rs 91 which is original.

Please be careful with Finolex cables lots of duplicate is available.

In Rishi there are two types P63 and P80 of 12.5kg i think P80 was Rs 110 per mts and P63 was is Rs 92 i dont know how you are getting this for Rs 78.

Please check for quality. HDPE pipe i have purchased in bangalore (with unknown source) i dont know did i pay more if your is original product price.

Are you sure P80 is costlier than P63 grade??? One of shop person told other way.