Construction material prices

These are Non - negotiated rates in the market
BengaluruBoy
Posts: 210
Joined: June 18th, 2009, 1:27 pm

Re: Construction material prices

Post by BengaluruBoy »

I took the service from Birla super like what HollyRogers has taken from ACC. they took 3 cubes for strength test and gave the first first result. After 1 week the strength should be minimum of M13.3 and ours came to 16.9. He says that the concrete should attain the max strength M20 in 27 days. I'll keep you posted.
maheshvivid2003
Posts: 370
Joined: January 24th, 2012, 11:57 am

Re: Construction material prices

Post by maheshvivid2003 »

im planing to call them for first floor roof ...i think its the best service provided from cement companies ...while roofing its difficult to handle these gangmens ...starting they do proper mixing n later they do as there wish

how about tapes and covering sheets ?
BengaluruBoy
Posts: 210
Joined: June 18th, 2009, 1:27 pm

Re: Construction material prices

Post by BengaluruBoy »

I think they provided covering sheets too my contractor. I was not there when they gave. Contractor said he is going to use it for the next roof. What is the tape you are talking about?

gangmen are rigiculpus bunch of people and in spite of shouting with them they didn't mix the CSJ properly. I was totally tired and stressed dealing with these huys for the entire day. they'll screw up every single time. I think RMC is better than the gangen as my observation that RMC can not go worse than these guys.
maheshvivid2003
Posts: 370
Joined: January 24th, 2012, 11:57 am

Re: Construction material prices

Post by maheshvivid2003 »

true if we go for birlasuper concrete mix they give certificate i guess

they used tapes in between centering sheets to cover the gap
maheshvivid2003
Posts: 370
Joined: January 24th, 2012, 11:57 am

Re: Construction material prices

Post by maheshvivid2003 »

good red sal rs1050 per cft
australian honne rs 1900 per cft
ghana teak rs 2100 per cft
maheshvivid2003
Posts: 370
Joined: January 24th, 2012, 11:57 am

Re: Construction material prices

Post by maheshvivid2003 »

Virtual-world wrote:I was using birla super but one wall (SSM) batch we found cement not setting immediately and some foam like observation was done also the bag and color looked different. We called company person, he started telling in rainy season it takes more time.Switched to Zuari primo and very happy with it. Used for columns slab and other works.
Zuari-53 grade Primo-320.
rs 320 is is old or new price

can u share the contact details of the dealer
uttam.undale
Posts: 4
Joined: July 18th, 2012, 11:40 am

Re: Construction material prices

Post by uttam.undale »

Hi Friends,

Next Mid-Week, I have plans for Ground Roof, can you pls suggest which Grade Cement can be used for this i.e CoroMandel OPC 43 or 53 Grade? or you would suggest any other brand cement?

BR
Uttam
maheshvivid2003
Posts: 370
Joined: January 24th, 2012, 11:57 am

Re: Construction material prices

Post by maheshvivid2003 »

i used birla super 53 grade suggested by my engineer
maheshvivid2003
Posts: 370
Joined: January 24th, 2012, 11:57 am

Re: Construction material prices

Post by maheshvivid2003 »

i searched for white sal in timber yard but most of them dont have white sal if they have quality isnt good

yesterday bought white sal cut peices for rs 1300 per cft ...good quality wood

ghana teak for rs 2150 per cft
BengaluruBoy
Posts: 210
Joined: June 18th, 2009, 1:27 pm

Re: Construction material prices

Post by BengaluruBoy »

wood cut to your requirements? 1300 for white sal may be on the higher end. i checked at one place in BSK 2nd stage near monotype bus stop. he quoted 1050 for red sal and 1150 white sal. the pieces he showed looked good but not sure when we really purchase.
Post Reply

Return to “Material prices”