Page 1 of 1

Painting/Polishing Calculation.

Posted: March 17th, 2014, 5:06 pm
by saisuraksha
Hi All,

I have done the Polishing on my teak wood window.

My Window size is 6 x 4.


My Painter have brought a measuring person and did the measurement.

Window Calcuation :

His Calculation is 6 x 4 x 1.80 == 43.2 sq.ft (If we would have done the polishing on both the side )

if one size polish and one side paint. he is splitting (1.80 to 1 to inside + 0.8 outside )

Polish in side ==> 6 x 4 x 1 == 24
Paint out size ==> 6 x 4 x .80 == 19.2

My question here is he is not detecting any thing for the glass inside the window. Do this calculation is correct ?
When i have asked the same question he says there is Beading + there is 2 step design work at the frame + thickness of the frame if we calculate all these things it will come the same. Next thing is this calcuation is goverment prescribed it seems do this is correct statement or do he is trying to fool me around.


My door size is 7 x 3

Door Calculation :
his calculation will be 7 x 3 x 2.6 ==> 54.6 sq.ft ( For two size polish)
7 x 3 x 1.30 ==> 27.3 sq.ft if one side polish

Do any one have got the standard calculation or do this calculations are correct

Regards
SaiSuraksha.

Re: Painting/Polishing Calculation.

Posted: March 17th, 2014, 8:29 pm
by prabhu422p
Hi,

i too need to do polishing for my TVUnit border and 3+2 sofa set.Please let me know the rates and how do they measure.

Thanks
Prabhakar

Re: Painting/Polishing Calculation.

Posted: March 18th, 2014, 4:23 pm
by saisuraksha
Teak wood Melamine polish is Rs 60 per sq ft.
Teak wood PU polish is Rs 100 per sq ft.
Poly coat polish is Rs 275 per sq ft.

Only the labor cost; material is ours.


Guys, really i am in need of measurement data if some one can input the data its a great help !!

i am wondering not even a single person have undergone this event ?

Re: Painting/Polishing Calculation.

Posted: March 18th, 2014, 5:02 pm
by prabhu422p
Thanks for the info.

Re: Painting/Polishing Calculation.

Posted: April 21st, 2014, 10:20 pm
by ardesarchitects
Hi Prabhu
Polish areas are calculated by area .The additional factor of 1.5 times or 1.25 times is based on the complexity of surface .If you have carving door they charge 3times the areas since it takes pleanty of time to do prepare for polishing.
For window frames glass areas are not removed since its more time consuming to polish a window than a plain door .

Regards
Ar.Praveen.N
Ardes Architects and Interior Designers
www.ardesarchitects.com
ardesarchitects@gmail.com