[Help] Gas Piping

[tech4pk]

Hi All,

I need to install the gas piping connecting the gas hub to the outside gas cylinders.
I had contacted couple of people who does this job, but they are showing some brass based valves, but they are not of ISI marked.
Do any of you have already done this? Would you please share me on where to get these ISI standard valves and copper pipes?

-kind regards,
pk

[JollyRogers]

You can contact Dilip at 9880066939 for all Gas Pipelining requirements.
Their charges are quite nominal, and they have done Gas pipelining from homes, corporate offices, 5 star hotels etc in and around Bangalore. You can refer my name (Mohan) and you can get the best rates.

[tech4pk]

^^ Thanks Mohan for your help. I will contact him, and refer your name.

[arkolli]

Hi all,

I need a small help from you. I am thinking of placing my cylender in the wash area (outside of the kitchen). Only separation is the wall. How much do they charge to have a connection through wall. Distance would be maximum 1.5Meters.

Or can i just have a hole in the wall and connect it through existing rubber pipe. Please advice me in this regard.
Thanks,Anil

[palmut]

JollyRogers - can you let me know on how much it costs ? What stage of the construction this needs to be taken care of - Before or after plastering ?

Thanks

[jackalbda]

I had almost similar requirement...cylinder and burner were separated by a wall...I did copper piping with valves and it costed me 2600...

[arkolli]

Hi jackalbda , could you please share with me the contact number of the guy who had done your work? Or send me the personal email to me.

Thanks,
Anil

[jackalbda]

I have sent you a PM with his contact details...

[maheshvivid2003]

can any body tell me the cost of gas piping with material and with out material prices

[pradeepecr]

Hi Mahesh,

I got it done last week, It cost around 130 Rs/ Rft for me it came 60ft for (G+1) floors. 4 valves (300Rs/per brass valve)
7800 Rs+ 1200Rs = 9K. I don't have info on labour contract charges. Gas piping person dilip have done decent work. I got him refered from this forum by jollyrogger.