myBDAsites.com

Dear Members,

The electrical contractor has quoted this for temporary BESCOM connection - 2 KW - 3 Phase - 56 days.

Total quote is - Rs 26000

Is this cost justified for 2KW - 3 Phase - 56 days temporary connection.

When requested for cost breakdown he gave something like this.

AEE - BESCOM - DD - Rs 11700 - Bill
3 Phase meter - Rs 4200 - Bill and reused for final connection
Bribe and Charges - Rs 3500 - No Bill
Legrand RCCB 4 Pole 40MA - Rs 2000 - No Bill but will be reused for final connection
Rest electrical items - Rs 4000 - No Bill but needed (2 rolls of best aluminum wire costs about 1800)

Regards,
Sudheer

I paid about 18k a few months back. so this is quite expensive.

Can someone tell me if this looks good ? Charges are different only for deposit...

All rate for 3 phase
-------------------------------------------------------------------
28 Days 56 Days
-------------------------------------------------------------------
2KVA - Deposit 6000 12000
2KVA - Meter 2500
2KVA - KEB Official 2250
2KVA - KEB Unofficial 4000
2KVA - Electrician Svc charges 2500

2KVA - Total 17250 23250


3KVA - Deposit 9000 18000
3KVA - Meter
3KVA - KEB official
3KVA - KEB Unofficial
3KVA - Electrician Svc charges

3KVA - Total 20250 29250

1. Monthly service charge for paying bill Rs. 300 (once in 56 days, if raking 56 day connection)
2. Last month bill paid by meter readin
3. 3 ph meter will be resued on permananet connection
4. Deposit adjusted in permananent bill BUT you got to tell them and also have ORIGINAL receipts.
5. Can go with 2 KVA to start with and add on later.
6. Min charges for 2KVA 28 days is 1350; for 3 KVA 28 days it is 1800.
7. Docs required:

PAN Card - 1 copy
PP Photo - 1
Sale Deed - 1 copy
Plan - 1 copy

@vpbs_bak,

I recently got 3Phase 3KVA temp connection for 56 days. My charges were slightly higher but your quote seems OK.

@vpbs_bak,

Yes got the connection within a week.

Apart from the total cost that you have mentioned, check if any additional charges (With ELCB/Wires/Switchboard/Switches/sockets) are needed for installing in your site.

Get full final quote end to end from your electrical contractor who gave you the quote.

Charges are same across the board. Ensure that you get a good RCCB/ELCB as its mandatory for the temporary connection.

My Quote for 3KVA for 28days is like this.
Bescom Deposit........... 9000
3phase meter ....4100
office expenses.. 3000
installation (includes cable,elcb, switch, socket)@SVC .....4000
Monthly minimum bill........2100

sahu.mgse

quote="vpbs_bak"]Can someone tell me if this looks good ? Charges are different only for deposit...

All rate for 3 phase
-------------------------------------------------------------------
28 Days 56 Days
-------------------------------------------------------------------
2KVA - Deposit 6000 12000
2KVA - Meter 2500
2KVA - KEB Official 2250
2KVA - KEB Unofficial 4000
2KVA - Electrician Svc charges 2500

2KVA - Total 17250 23250


3KVA - Deposit 9000 18000
3KVA - Meter
3KVA - KEB official
3KVA - KEB Unofficial
3KVA - Electrician Svc charges

3KVA - Total 20250 29250

1. Monthly service charge for paying bill Rs. 300 (once in 56 days, if raking 56 day connection)
2. Last month bill paid by meter readin
3. 3 ph meter will be resued on permananet connection
4. Deposit adjusted in permananent bill BUT you got to tell them and also have ORIGINAL receipts.
5. Can go with 2 KVA to start with and add on later.
6. Min charges for 2KVA 28 days is 1350; for 3 KVA 28 days it is 1800.
7. Docs required:

PAN Card - 1 copy
PP Photo - 1
Sale Deed - 1 copy
Plan - 1 copy[/quote]

Thanks sudheerhundi . What is a good RCCB/ELCB ? Any specific brand ?

@sahu.mgse: you have no 'service charge' from the guy who is doing this for you ? also any 'unofficial' BESCOM charges ?

vpbs_bak wrote:Thanks sudheerhundi . What is a good RCCB/ELCB ? Any specific brand ?

@sahu.mgse: you have no 'service charge' from the guy who is doing this for you ? also any 'unofficial' BESCOM charges ?

office expenses include unofficial charges. BTW, connection yet to be done. as in any work some surprises will be there in the end.

Btw, I was told you need to have the borewell registered & show the proof to get the temp connection. I believe if they see a 2KVA or 3KVA requirement they assume you have borewell..? Dunno how else they can find unless one discloses.

Hi Sudheer & all,

My temporary BESCOM connection has been converted to permanent connection via UG cables. I got "used Aluminum wire" about 200+ ft. Send PM if anyone needs it.

Regards
Mohan