myBDAsites.com

During Roof concrete I have seen some construction sites spreading plastic cover & natural Mat over centring sheet, before placing iron rods. What is the advantage using this mat?

Pradeep

People these days use sheet centring plates. These plates provides a very smooth finish to the concrete slab. At the time of plastering, it is very difficult to plaster smooth surfaces, for which the contractor sometimes charge you additionally to chip the slab to enable plastering. To avoid this, the mats when put above the centring plates, provides a coarse finish to teh slab.

Also, there are places where some have not plastered the roof at the outside (balconies), as the mats provide a unique finish, which appeals to some people.

Hi Pradeep,
You can experiment with various textures sheets while concreting.You can Tyre, bamboo,mangalore tiles or some other shapes to give interesting textures to the slab bottoms.But the contractor should be careful that shapes doesn't move out.Regular mats are used for rough texture to hold the plastering.

Regards
Ar.Praveen.N
Ardes Architects and Interior designers
ardesarchitects@gmail.com
www.ardesarchitects.com

Hi

even i saw that in some construction where they are doing that but does1. our centering people capable of fixing those mats/plastic sheet without moving?
2. Does they charge for the same additionally?
3 . If it moves where filling RCC then does it can provide leakage? Am i right?
4. Where do i get those material/what is charge
5.If is provide tiles (oodu we call) above the RCC latter then does we need this ?

Sam.

Hi Praveen/M3_07,
Thanks for your info.

hi Sam,
It seems they are charging 4 Rs Material + Labour.
Even I have seen in some places, Mat used for stair case inclined bottom surface to avoid hacking later.

-Pradeep

I pay 2.75/ SFT for the job....call chandru @ 9980289111

Thanks m3_07

But please do tell me why it is really need? One thing i got it is for plastering ,apart from it any advantages.

If i used wooden sheet instead of smooth metal sheet for centering ,what is the problem? .

Please do guide me.

sam_m400 wrote: If i used wooden sheet instead of smooth metal sheet for centering ,what is the problem? .

Please do guide me.

They paint the surface of the metal sheet with Oil, so that the concrete does not settle on to the metal sheets. The same is not applicable for the wooden surfaces, hence there are no alternatives.

The second alternative is that you could go for the "mud centring", this actually costs more & is indeed a very perfect centring too. You could use this option, provided you have a sprawling space all around you.

Probably, if the metal sheet is manufactured with similar to the grooves of the mat ingrained on the surface where it will come in contact with laying concrete then it will help in plastering for all areas instead of ceiling area alone.

Vimal

Dear m3_07

Is the rate 2.75 is inclusive of labour +material (mat) or just for material (mat)

Why we cannot go for wooden centering? . Is it costly or not available nowdays as all moved to steel ones?

Apart from plastering advantage any other advantage as you already mentioned why it is being used?

I have seen a plastic cover as well lied below the Mat ,what is its purpsose?

Regards
Moni